Calculator4Everyone

Wire & Breaker Sizer — science and physics formula calculators

Find the recommended breaker size and minimum safe wire gauge for a load, including continuous-load derating and voltage-drop checks.

Category: Electricity & Energy

About this tool

What Is the Wire and Breaker Size Calculator? When you install anything you need to know how much current it draws, then pick a breaker that protects the circuit and a wire gauge that can carry that breaker. This tool does all three steps from a single number: the load power. Inputs The load power in watts. The supply voltage in volts. The wiring type: single phase or three phase. A continuous load toggle, which applies the 1.25 factor. How the Calculation Works On a single phase supply the current is the power divided by the voltage. On a three phase supply the power is divided by the square root of three times the voltage. When the continuous load toggle is on, the result is multiplied by 1.25, and that becomes the design current. The tool selects the first entry in the standard breaker list that is equal to or greater than the design current. The wire gauge is then chosen to match that breaker rating. The Breaker Size Table The breakers offered are 5, 6, 10, 15, 16, 20, 25, 32, 40, 50, 63, 80, 100, 125 and 160 amps. If the requirement exceeds all of them the tool records 200 amps and flags it as above standard. The Wire Gauge Table Up to 10 amps: 16 AWG at 1.5 square millimetres. Up to 16 amps: 14 AWG at 2.5 square millimetres. Up to 25 amps: 12 AWG at 4 square millimetres. Up to 35 amps: 10 AWG at 6 square millimetres. Up to 50 amps: 8 AWG at 10 square millimetres. Up to 70

Browse all tools — Browse categories